Anvils Technical parameters Packing of Anvils Anvils - Assortment Technical parameters 1.  Material: C=0,3%, Mn=1,3%, Si=0,5% According to factory norm/standart (manganese iron) 2.  Tolerance of weight is 10% according to the norms 3. Hardened shift is up to 1/3 of the high of the anvil Hardness: min 420 HB (44 HRC) 4. Tolerance of HARDY HOLES up to 20 x 20 mm +/- 2mm 20 x 20 till 30 x 30 mm +/- 4 mm above 30 x 30 - Peddinghause 200 - 32 + 4 mm - Habermann 200 - 35 + 2 mm, - 1 mm 5. Tolerance of PRITCHEL HOLES Anvils Bulgar +0,5 -0,3 Anvils Peddinghause +0,5 -0,3 Anvils Habermann diam. 25 +/- 0,7 diam. 12 +/- 0,5 6. Curve of working surface is up to 5 mm max. 7. Roughness of working surface Ra = 3,2 8. It is highly recommended to use the hammer weight of which does not exceed the weight proportion of 1:30 anvil to hammer. Packing of Anvils The Anvils can be packed a/ in wooden cases b/ loose on pallets c/in special bulk wooden crates Size of case - cm Type of anvil pcs in wooden case 46x24x14 Locksmith   3 5 52x27x16 Locksmith   5 5 58x30x18 Locksmith   7 7 65x33x19 Locksmith  10 10 41x31x23 Locksmith  20 2 41x20x23 Locksmith  20 1 50x36x26 Locksmith  30 2 50x23x26 Locksmith  30 1 57x40x30 Blacksmith  50 2 57x25x30 Blacksmith  50 1 66x29x34 Blacksmith  80 1 68x31x36 Blacksmith 100 1 78x34x40 Blacksmith 150 1 84x38x44 Blacksmith 200 1 90x39x47 Blacksmith 250 1 50x32x26 Bulgar  30 2 50x20x26 Bulgar  30 1 57x40x27 Bulgar  50 2 57x23x27 Bulgar  50 1 71x27x34 Bulgar  90 1 62x26x30 Peddinghaus  50 1 62x40x30 Peddinghaus  50 2 68x29x33 Peddinghaus  75 1 80x31x38 Peddinghaus 110 1 108x42x44 Peddinghaus 200 1 45x20x45 Piercing Desk 1 108x42x44 Habermann 1 Pallet size  120 x 80 Anvils - Assortment Locksmith Anvil Blacksmith Anvil Bulgarien type Anvil Peddinghaus Anvil Peddinghaus Anvil - big Piercing Desk Habermann Smith Horn Stake Horseshoe Double Horn Locksmith Anvil kg a b c d e h m n v 3 63 64 58 35 32 10 120 78 90 5 75 71 67 40 38 12 142 91 107 7 82 75 88 46 42 14 160 100 120 10 96 96 86 52 48 16 180 115 136 20 120 122 108 65 60 20 225 145 170 30 155 155 125 68 68 20 260 174 200 Blacksmith Anvil kg a b c d e h m n v 50 170 190 140 90 85 25 288 200 235 80 195 230 175 98 56 25 320 235 280 100 220 235 170 105 95 27 375 255 305 150 260 290 180 130 120 25 418 280 350 200 255 310 210 145 140 30 460 320 390 250 292 295 245 155 140 30 505 320 415 Bulgarien type Anvil kg a b c d h i m n v 30 135 180 125 90 20 20 200 145 200 50 165 190 160 110 20 20 265 180 215 90 200 235 205 140 27 28 295 205 280 Peddinghaus Anvil kg a b c d h i m n v 50 162 242 166 105 25 22 238 195 245 75 185 269 176 127 25 22 277 234 273 110 210 317 217 135 25 22 310 251 320 Peddinghaus Anvil - 200 kg a b c d f g h i k 200 260 478 282 125 105 102 32 32 135   l m n v             125 440 328 370             Piercing Desk Size 400x400 mm Height 100 mm   Circumference   Half round 70,50,35,30,26,22,16,13,11 R180, 5/4",1",3/4",5/8",1/2" Half square 35x35, 26x26, 20x20, 18x18, 15x15, 13x13 Round holes 52, 45, 40, 35, 30, 25, 22, 20, 18, 16 Square holes 45x45, 10x10, 35x35, 30x30, 26x26, 22x22, 18x18, 16x16 Oblong holes 80x20, 75x18, 60x20, 42x16, 35x20, 26x18 Habermann kg a b c d f g h i j 200 330 420 330 128 100 100 35 25 15   k l m n v           125 120 430 300 365         Smith Horn Working face diam. 360/40 Base diam. 500x25 Total high 750 mm Weight 163 kg Case  80x60x60cm Stake 1,5 1,5 65x75 95 2,0 2,0 60x60 155 Horseshoe 155x98 160 Double Horn Type kgs length mm hight mm 24 24 500 mm 350 (+100)

BRANCO, Boleslavská 1391, Stará Boleslav, PSČ 250 02 Czech Republic
Phone No. 00 420 326 911 253, Fax No. 00 420 326 911 254, E-mail: branco@branco.cz